Insurance repair

Software for insurance repair contractors working to panel SLAs

Your own field operatives and your subcontractors on one job list, tiered offers to your network, multi-trade reinstatement jobs and an SLA clock on every status. On Enterprise.
The basics

What an insurance repair contractor needs from software

The terms, and where installHUB sits next to the panels’ own systems.

Insurance repair contractors take work from insurers, claims handlers and repair networks, then carry it out with their own field operatives and a network of subcontractors, against the panel’s SLAs. installHUB puts all of it on one job list: book your own field operatives, or a crew of several trades, from the same booking form as your subcontractors, offer work to your subcontractors tier by tier with the first to accept winning, and run an SLA clock on every job status in working hours. Export the job list with its SLA column whenever a panel asks how you performed. Where the networks you work for run their own systems, we build the integrations as part of setting you up. It’s on the Enterprise plan, and subcontractors you invite join free.

What does an insurance repair contractor do?
An insurance repair contractor sits on the panels of insurers, claims handlers and repair networks and carries out the work once a claim is approved: emergency repairs such as gas, heating, plumbing and electrical call-outs, and larger reinstatement work across several trades after a leak, fire or storm. Most run a mix of employed field operatives and subcontractors, and every job runs against the panel’s SLAs for first contact, attendance and completion.
What software does an insurance repair contractor need?
Software that takes jobs in from several panels, books the contractor’s own field operatives and its subcontractors side by side, offers work to subcontractors fairly and in order, runs one job across several trades and visits, tracks every job against the SLA it was sent with, captures the evidence from site, prices extra work found once the job is opened up, and gives the contractor the figures to show each panel it hit its targets. It runs next to the panels’ own claims systems and doesn’t replace them.
Where installHUB sits
installHUB runs the contractor’s side: the job list, the booking, the subcontractor network, the SLA clocks, the site evidence and the policyholder. It doesn’t handle claims, validation, reserving, estimating or loss adjusting, and it has no pre-built connection to any insurer’s or network’s claims system. Contractors run it next to those systems.
When you don’t need it
If your own field operatives attend every job and you never work to a panel’s SLA, a repair desk setup will do: see reactive repair. This page is for contractors whose work comes from panels and goes out to a mix of your own people and subcontractors.
The flow

From instruction to closed job, on one record

Eight steps, on one platform.
1

The instruction lands

Your office raises the job, or it arrives through a web form or enquiry link. Existing jobs and customers come in by spreadsheet import. Flag each job with the panel it came from, so you can filter and report by panel.

2

Your own team, or your network

One booking form searches your field operatives and your network members together and shows who is free, nearest first. Book the visit yourself, or set the work type to dispatch and offer it to your subcontractors.

3

Offers go out tier by tier

Offer to a few subcontractors at a time every few minutes, tier 1 first, so a job doesn’t vanish in seconds. If nobody in tier 1 accepts, the next wave goes to tier 2. The first to accept wins, the other offers are withdrawn and those subcontractors are told. If nobody accepts, you’re alerted and can offer it again.

4

Several trades, several visits, one job

Book a crew of field operatives onto one visit, each with their trades and hours, and plan reinstatement work over more than one day. A plan template builds every visit and contractor step in order, and a contractor confirms their part from a link on their phone, with no login.

5

The SLA clock runs

Each job status carries a time limit in working hours or working days, set per work type if you need to. Every job shows on time, at risk or over, the people responsible are alerted, and a morning digest lists what needs chasing.

6

What’s found on site gets priced

When the job opens up more work, an additional work report prices it against the same job, with photos and the customer’s signature, so the file keeps one audit trail.

7

The policyholder stays informed

Message them by SMS or through a customer portal under your brand, and send a payment request for the excess or anything outside the claim, paid by card.

8

The claim sits on the job

An insurance claim details form records the insurer, claim reference, date and cause of loss, the loss adjuster, the authorised scope and limit, and the excess. On site, the field operative logs any variation from the authorised scope and photographs the damage before and after the works.

Panel reporting

Show each panel how you performed

Every job carries its SLA state, so the dashboard counts the jobs at risk and over, and the job list filters by SLA state, panel flag, status and assignee. Export the filtered list, SLA column included, to CSV or Excel for a panel review, or send SLA breaches to your other systems through Zapier as they happen.

  • SLA column and at-risk / over filters on the job list
  • Panel as a flag on each job, filtered and exported
  • CSV or Excel export of any filtered job list
  • Morning digest of what needs chasing
Your network

Subcontractors vetted once, offered work in order

Invite subcontractors by email or a sign-up link. Each completes your approval questions (insurance, trade registrations, competencies) and uploads documents, with reminders before anything expires. You place each one in an approval tier, which is the order work is offered in; within a tier the order is drawn at random. Subcontractors in an Enterprise network are on a free subsidised partner plan, so taking your work costs them nothing.

Your own team

Your own field operatives, by trade

Give each field operative their trades and certificates, group the scheduler by trade, and save regular crews as teams that fill a booking in one click. On site, each field operative ticks off their part in the installHUB mobile app and the visit lead closes the visit, with photos, timestamps and signatures on the job.

The boundary

What it does, and what it doesn’t

installHUB runs the contractor’s side, next to the panels’ own claims systems.

What installHUB does

  • Books your own field operatives and your subcontractors from one booking form
  • Offers work to subcontractors a few at a time, tier by tier, first to accept wins
  • Runs one job across several trades, field operatives and days, from a plan template
  • Sends contractors a link to confirm their part, with no login
  • Runs an SLA clock on every job status, per work type if needed, with alerts and a morning digest
  • Exports the job list with its SLA column to CSV or Excel
  • Prices extra work found on site against the same job
  • Keeps the policyholder informed under your brand and takes card payments
  • Works in pounds, euros or US dollars, in each company’s time zone
  • Builds the integrations you need with the panels’ or your subcontractors’ own systems, as part of setting you up

What it doesn’t do

  • Claims handling, validation, reserving, estimating or loss adjusting
  • Ready-made connectors to named insurer or network claims systems (we build the integration you need instead)
  • An SLA hit-rate report by panel or by subcontractor (export the job list instead)
  • Move subcontractors between tiers automatically on acceptance rate or performance (you set the tiers)
  • Route work by subcontractor cost
  • Reinstatement trades such as drying, plastering or joinery as built-in work types (we set them up as your own work types before you go live)
  • Show subcontractors’ field operatives live on your map

Everything on this page is on the Enterprise plan

The subcontractor network, approval tiers, dispatch, SLA clocks, the customer portal and white labelling are Enterprise features. Crews, plan templates, contractor links and card payments come with it. Subcontractors you invite join free.

The quickest way to know whether it fits is to walk one of your own panel jobs through it.

Where it fits

Related pages

Questions

Insurance repair contractors, answered

Which software runs an insurance repair contractor's own field operatives and subcontractors on one job list, against the panel's SLAs?+

installHUB, on the Enterprise plan. Every job sits in one list whether your own field operatives or a subcontractor carries it out. One booking form searches your team and your network members together, and every job status can carry an SLA in working hours or days, with at-risk and over-SLA filters on the list.

Can we prove our SLA performance to the insurers and networks we work for?+

Yes, from the job list. Each job carries its SLA state, you flag each job with the panel it came from, and you can export any filtered list, SLA column included, to CSV or Excel. The dashboard counts jobs at risk and over, and Zapier can send each SLA breach to your other systems. A ready-made SLA hit-rate report by panel isn't available today; the export gives you the figures.

Can we offer jobs to subcontractors tier by tier, without a free-for-all?+

Yes. Set a work type to dispatch and choose how many subcontractors are offered at a time and how many minutes apart. Tier 1 is offered first, and if nobody accepts, the next wave goes to tier 2. The first to accept wins, the other offers are withdrawn and those subcontractors are told. Within a tier the order is drawn at random. Tiers are the approval levels you set; they don't change on their own.

Can one reinstatement job cover several trades and several visits?+

Yes. Book a crew of field operatives onto one visit, each with their trades and hours, add more days to the job, or build every visit and contractor step from a plan template. A specialist contractor confirms their part from a link on their phone, with no login, and the job can't move on until the steps you choose are done.

How do jobs get in from the panels we work for?+

Your office raises them, they arrive through a web form or enquiry link, or existing work comes in by spreadsheet import. Through Zapier you can find jobs and update a job's status, and installHUB sends job added, status change, SLA breach and payment events out. Where a panel or network sends work from its own system, we build that integration as part of your Enterprise setup.

Do our subcontractors have to pay for installHUB?+

No. Subcontractors in an Enterprise network join on a free subsidised partner plan. They answer offers from their own login and their field operatives work the jobs on the installHUB mobile app.

How is extra work found on site handled?+

An additional work report prices it against the same job, with photos and the customer's signature, so the original job and the extra work stay on one record. You can send the policyholder a payment request for anything the claim doesn't cover.

Does installHUB replace the insurer's claims system?+

No. It runs the contractor's side of the work: booking, subcontractors, SLAs, site evidence and the policyholder. Claims handling, validation and settlement stay with the insurer or network.

Does it work outside the UK?+

Yes. installHUB runs in more than one country, in pounds, euros or US dollars, and the SLA clock follows each company's own time zone and working hours. In the US the same buyer is usually called a restoration contractor on a carrier or TPA program. The UK-only parts are gas safety records (CP12) and electricity grid paperwork.

GET STARTED

Ready to manage your jobs end to end?

Join hundreds of installation businesses running their full workflow on installHUB.

✓ No credit card required

✓ 1 month free trial

✓ Cancel anytime

Company

©2026 installHUB™ | A product of Khan Soft Ltd, registered in England no. 15956975, Unit C Piccadilly Business Centre, Aldow Enterprise Park, Blackett Street, Manchester, M12 6AE