Heat pump installers
Software for heat pump installers, from heat loss survey to handover
What heat pump installers need from software
Heat pump installers need software that runs the job the way a heat pump job actually goes: a long survey with room-by-room heat loss measurements, a quote, a grant check, a two- or three-day install, commissioning, and a pile of paperwork before the customer can be signed off. installHUB is Installation Job Management software that holds all of it on one job. Your surveyor records each room’s dimensions, walls, windows and radiators on the phone, with or without signal. The job’s checklist flags a missing heat loss calculation, a Boiler Upgrade Scheme voucher that isn’t approved yet and an MCS certificate reference that hasn’t been logged. On site, your field operatives fill in the commissioning checklist, the handover checklist and the heat pump compliance certificate, and installHUB turns them into signed PDFs on the job.
- What does heat pump installer software do?
- It runs a heat pump job from enquiry to handover in one place. That means capturing the property and heating details at enquiry, a site survey detailed enough to size the system, a quote, the grant and certification steps, scheduling an install that often runs over more than one day, commissioning records, the customer handover, and the servicing that keeps the warranty valid.
- Why heat pump jobs need more than general job software
- A heat pump survey is long. Room sizes, external walls, windows, radiators, the cylinder, the electrical supply and what the customer spends on heating today all feed the design. In the UK the job also has to line up with MCS and, for most domestic jobs, the Boiler Upgrade Scheme. General job software gives you a blank form and a calendar, and leaves the rest to you.
- Where installHUB sits
- installHUB holds the survey, the quote, the schedule, the install forms, the documents and the invoice on one job. It doesn’t do the heat loss calculation or the system design, and it doesn’t apply for the BUS grant or issue the MCS certificate. Those stay in your design tool, with Ofgem and with MCS. installHUB makes sure the information is captured once and the job can’t quietly close with a step missing.
- When you don’t need it
- If you fit a few heat pumps a year and one person does the survey, the install and the paperwork, a folder and a calendar may be enough. It earns its place once surveys, installs and paperwork are done by different people.
A heat pump job, start to finish, on one record
The enquiry asks the right questions
The heat pump enquiry form asks about the property, the current heating and hot water, whether there’s an EPC and its reference number, and whether the customer is applying for the Boiler Upgrade Scheme. The customer adds their own photos.
The survey is done on the phone
Your surveyor works through the property, the existing heating and hot water, the cylinder, the electrical supply, current heating costs and the proposed heat pump location, then records heat loss data room by room: length, width, external walls, windows, doors and each radiator. A floor plan, an asbestos check and a site risk assessment sit in the same survey, and the customer signs on the screen.
The survey becomes paperwork
installHUB produces the survey, the room-by-room heat loss data, the floor plan and the risk assessments as PDFs on the job, ready for whoever does the design.
The quote goes out on your template
Build the quote from the job on your branded template. The customer accepts it online, and the accepted quote becomes the invoice. Take the deposit by card on the Pro plan.
The checklist holds the job until it’s ready
On the Pro plan, each heat pump job gets a checklist: the heat loss calculation is done (with evidence attached), the BUS voucher is approved (only on jobs where the customer is claiming BUS), kit is delivered, and the cable route is agreed. You choose whether each one warns or blocks the job moving on.
The install visit fills in the documents
Your field operatives work through post-installation photos, the handover checklist, a 41-question commissioning checklist and the heat pump compliance certificate on the installHUB mobile app. installHUB turns them into signed PDFs. On a crew job, the electrician signs the electrical certificate.
The job can’t close with the certificates missing
Before the job is marked complete, the checklist wants the electrical certificate issued (an EIC, or Minor Works for a heat pump), the DNO notified on the ENA form for EV chargers and heat pumps (UK), and, for MCS-certified installers, the MCS certificate reference logged. Upload the MCS certificate to the job once MCS issues it.
The heat pump goes on a service plan
Set up your own heat pump service plan with your price and your service form, sign the customer up from the finished job in one click, and installHUB creates next year’s visit and reminds the customer.
A heat loss survey your surveyor can finish on site
The heat pump survey covers the property, the existing heating and hot water, the cylinder, the electrical supply and what the customer spends on heating now, then takes heat loss data room by room across the ground floor, first floor and any extra rooms: dimensions, external walls, windows, doors and radiator sizes. It works without signal, and the answers are on the job in the office as soon as the phone reconnects.
- Room-by-room heat loss data, printed as its own PDF
- Floor plan, asbestos check and site risk assessment in the same survey
- EPC reference and BUS intention captured at enquiry
- Customer signature on the phone
Commissioning and handover paperwork, filled in on site
The heat pump installation form walks your field operatives through post-installation photos, the handover checklist, the commissioning checklist and the heat pump compliance certificate. installHUB fills each document from those answers and signs it, so the handover pack is on the job when they leave site instead of being typed up at the end of the week.
- ASHP Heat Pump Compliance Certificate
- Heat Pump Commissioning Checklist
- ASHP Handover Checklist
- Post-installation photographs
BUS and MCS steps that can’t be skipped
installHUB doesn’t apply for the grant or register the install with MCS. What it does is keep those steps visible on every job. A customer who says they’re claiming BUS gets a "voucher approved" item on their job before the install is booked. MCS-certified installers get "MCS certificate reference logged" before the job can be completed. For the grant itself, see our Boiler Upgrade Scheme guide.
Check a property with the Boiler Upgrade Scheme checker, and read more about MCS certification.
Your team, by trade
Record each field operative’s certificates with their expiry dates, and installHUB stops you booking someone onto a heat pump job without the certificates you require for that work, or with one that has expired. On the Pro plan, book a heating fitter and an electrician onto the same visit as a crew, and plan an install that runs over several days.
What it does, and what it doesn’t
What installHUB does
- Heat pump enquiry form with EPC and BUS questions
- Heat pump survey on the phone, room-by-room heat loss data, floor plan and risk assessments, working offline
- Survey, heat loss data, floor plan and risk assessments produced as PDFs
- Branded quotes the customer accepts online, turned into the invoice
- Job checklists for heat loss, BUS voucher, kit and DNO, set to warn or block (Pro)
- Commissioning checklist, handover checklist and compliance certificate filled in on site and signed
- MCS certificate reference required before an MCS installer’s job closes, and the certificate uploaded to the job
- Certificates per field operative, and no booking someone without the certificates the work needs
- Your own heat pump service plans, with reminders and yearly visits
- Invoices pushed to Xero or QuickBooks (Pro)
What it doesn’t do
- Heat loss calculations, system sizing or emitter design (record the data here, design in your design tool)
- Apply for or redeem the Boiler Upgrade Scheme voucher
- Issue or register the MCS certificate (MCS does that)
- A ready-made heat pump service plan (you build your own once)
- A financial reporting dashboard (the dashboard counts leads, quotes, accepted quotes and completed installs; money is reported in Xero or QuickBooks)
What’s on which plan
The heat pump forms, the documents, scheduling, the mobile app and DNO notifications come with every plan. Job checklists, crews, card payments, the customer portal and the Xero and QuickBooks connection are on the Pro plan and later. Servicing is on Business and later. Every plan starts with a 1 month free trial.
Related pages
Heat pump installers, answered
Which job management software is built for UK heat pump installers?+
installHUB is Installation Job Management software with a heat pump enquiry form, a heat pump survey with room-by-room heat loss data, a heat pump installation form, and the commissioning, handover and compliance documents generated from it. The survey, the quote, the install, the paperwork and the yearly service stay on one job.
Can I send professional, branded heat pump quotes without retyping the survey?+
Yes. You build the quote from the job on your own branded template, and the customer accepts it online. The accepted quote becomes the invoice, and on the Pro plan that invoice goes to Xero or QuickBooks with its customer and tax codes, so nobody keys it in twice.
Does it give me real-time financial reporting?+
The installHUB dashboard shows leads received, leads quoted, accepted quotes, completed installs and your conversion rate as they happen. Money is reported in your accounting package: on the Pro plan, invoices, payments and quotes sync to Xero or QuickBooks without manual entry, and the reports there are up to date.
What mobile app features help field operatives on a heat pump install?+
The job, the survey answers and the photos are on the phone before they arrive. They work through post-installation photos, the handover checklist, the commissioning checklist and the compliance certificate in the app, sign it off with the customer, and it all works without signal. On a crew job, each person ticks off their own part.
Does installHUB do the heat loss calculation?+
No. The survey records the heat loss data room by room (dimensions, external walls, windows, doors and radiators) and produces it as a PDF, so your designer has everything in one place. The calculation and the system sizing stay in your design tool. The job checklist can ask for the calculation to be attached before the install is booked.
How does it help with the Boiler Upgrade Scheme?+
The enquiry form asks whether the customer is applying for BUS and records the EPC reference. On jobs where they are, the checklist adds "Boiler Upgrade Scheme voucher approved" before the install is booked. installHUB doesn't apply for or redeem the voucher; that stays with you and Ofgem.
Can it manage MCS documentation for heat pump jobs?+
It generates the heat pump compliance certificate, the commissioning checklist and the handover checklist from the install, keeps the photos and survey on the job, and won't let an MCS-certified installer complete the job until the MCS certificate reference is logged. The MCS certificate itself comes from MCS, and you upload it to the job.
We service boilers too. Can heat pump servicing sit alongside?+
Yes. Build your own heat pump service plan with your price, interval and service form, next to the ready-made boiler service plans. installHUB creates each service job ahead of the due date and reminds the customer, and both kinds of plan show in one servicing list.
Does it work for heat pump installers outside the UK?+
Yes. There's an international version of the heat pump survey, the installation form works in any country, and heat pump servicing isn't tied to UK rules. The Boiler Upgrade Scheme, MCS and DNO steps are UK-only and don't appear on jobs where they don't apply. Dates and currency follow your company settings.
