Solar PV installers
Software for solar PV installers and their teams on the roof
What solar PV installers need from software
Solar PV installers lose time in three places: the survey, the scaffold and the paperwork. installHUB is Installation Job Management software that puts all three on the job your team carries on their phones. The surveyor records every roof area’s pitch, orientation, covering and condition, the scaffold the job needs and photos for the scaffolder, on the installHUB mobile app, which keeps working on a roof or in a loft with no signal and sends the answers once it’s back in range. Before install day, the job checks the roof survey is signed off and the scaffold has been inspected in the last seven days. After it, installHUB fills in the MCS installation and commissioning checklists, the PV array test report and the handover document from what your field operatives recorded, and prints whether the job is a G98 notification or a G99 application.
- What does solar PV installer software do?
- It runs a solar job from enquiry to handover: the customer’s details and bill, a roof survey, the design and quote, the scaffold, the install day, testing and commissioning, the grid paperwork, the handover pack and the invoice. For a team, it also means everyone on site works from the same job on their phone.
- What solar teams need from a field app
- Signal on a roof or in a loft is poor, so the app has to save everything on the phone and send it when it can, without losing or doubling anything. It needs the survey and the design on the phone before anyone climbs a ladder, places to take the photos the paperwork needs, and a quick way to capture serial numbers.
- Where installHUB sits
- installHUB runs the survey, the job, the team and the paperwork. It doesn’t design the array, model shading or size strings. If you design in OpenSolar, installHUB connects to it; otherwise the final design and its documents are uploaded to the job.
- When you don’t need it
- If one crew does a handful of installs a month and the owner does every survey, a calendar and a shared drive can cope. It earns its place once surveys, scaffold, installs and paperwork are split between people.
From the roof survey to the handover pack
The enquiry comes in with the bill
The solar enquiry form asks about the property, the electricity supply (the customer can scan their MPAN), the proposed system, and collects the customer’s own photos.
The survey covers every roof area
For each roof area the surveyor records which part of the building, the azimuth, the pitch, the covering and its condition, then the roof structure, property and planning, supply, meter and earthing, the consumer unit, equipment locations and cable routes, and risks or remedial work. The customer and surveyor sign it off on the phone.
Scaffold is planned from the survey
Which sides need scaffold, gutter height, approximate length, what’s underneath, overhead cables, van parking, and photos and notes for the scaffolder, all captured in the survey.
The design lands on the job
The office adds the final design to the job: design images and documents, and each string’s roof area and panel count. If you design in OpenSolar, a sold project arrives as a job with the system, a priced quote and the proposal attached (Pro plan).
The job won’t go up the ladder early
On the Pro plan, the job checklist asks for the structural and roof survey to be signed off, with evidence, before the install is booked, and for the scaffold to be erected and inspected within the last seven days, with a photo, before the install can be marked done. It only asks for the scaffold check where the survey says scaffold is needed.
Install day on the phone
Your field operatives run a pre-start site check (risk assessment read, changes since the survey, suspected asbestos, safe access for work at height), scan inverter serial numbers with the phone camera, and photograph each roof area, fixings, cable entry points, the inverter, isolators and labels, and the consumer unit.
The PV paperwork fills itself in
installHUB produces the MCS survey form, the MCS solar PV installation and commissioning checklists, the PV array test report and the solar PV system handover document from the job, along with an electrical installation and testing certificate.
The grid paperwork follows the system size
installHUB works out from the recorded system size, supply phases and any export limit whether the job is a G98 notification after commissioning or a G99 application before it, and prints that on the survey documents. Submit through ENA Connect Direct, or generate the G98 and G99 forms as PDFs (UK).
A field app that keeps working on the roof
Signal drops on roofs, in lofts and on rural jobs. The installHUB mobile app saves every answer, photo and signature on the phone and sends it once the phone reconnects. Every app release is tested for exactly that: a form filled in with no signal, the app closed and opened again, and the answer reaching the office once.
- Surveys, install forms, photos and signatures without signal
- Sends automatically when the phone reconnects
- Serial numbers scanned with the camera
- The survey and design on the phone before install day
MCS forms from the job, not from memory
For MCS-certified installers, installHUB fills in the MCS survey form, the solar PV installation checklist, the solar PV commissioning checklist and the PV array test report from what was recorded on site. Above 50 kWp, where MCS doesn’t apply, the MCS forms are left out and the array test report is still produced. The job checklist won’t let an MCS installer complete the job until the MCS certificate reference is logged, and the certificate MCS issues goes on the job.
More on MCS compliance software and MCS certification.
One crew, one job, several trades
On the Pro plan, book roofers, PV fitters and an electrician onto the same visit as a crew, plan an install over several days, and each person ticks off their own part. Record each field operative’s certificates with expiry dates, and installHUB won’t book someone onto solar work without the certificates you require.
What it does, and what it doesn’t
What installHUB does
- Solar enquiry form, with the customer’s MPAN scanned and photos uploaded
- Roof survey by roof area, with scaffold planning and photos for the scaffolder
- Mobile app that works without signal and sends once it reconnects
- Roof survey sign-off and seven-day scaffold inspection checks before install day (Pro)
- Pre-start site checks, serial scanning and install photos on the phone
- MCS survey, installation and commissioning checklists, PV array test report and handover document from the job
- G98 or G99 route worked out from the system size and printed on the documents (UK)
- DNO submission through ENA Connect Direct, or the G98 and G99 forms as PDFs (UK)
- Sold OpenSolar projects arriving as jobs, with install dates written back (Pro)
- Solar PV annual service plans with reminders
What it doesn’t do
- Array design, shading analysis or string sizing (design in your design tool or OpenSolar)
- Issue the MCS certificate (MCS does)
- Apply for the Smart Export Guarantee for the customer
- Read live generation or monitoring data from inverters
What’s on which plan
Solar forms, documents, scheduling, the mobile app and DNO submissions come with every plan. Job checklists, crews, card payments, the OpenSolar integration and the Xero and QuickBooks connection are on the Pro plan and later. Servicing is on Business and later. Every plan starts with a 1 month free trial.
Related pages
Solar PV installers, answered
Which job management app works offline for solar PV teams on site with poor signal?+
installHUB. The mobile app saves surveys, install forms, photos and signatures on the phone and sends them once the phone reconnects. Each app release is tested by filling in a form with no signal, closing and reopening the app, and checking the answer reaches the office exactly once.
What software do UK solar PV installers use to run surveys, installs and paperwork in one place?+
Installation Job Management software such as installHUB: a solar enquiry form, a roof survey by roof area, scheduling for the survey and install teams, a field app, and the MCS, DNO and handover documents generated from the job, then the invoice.
Can the survey capture each roof separately?+
Yes. For each roof area the surveyor records the part of the building, azimuth, pitch, covering and condition, then the roof structure, access and scaffold needs, supply and earthing, the consumer unit and cable routes. The office adds the final design, with each string's roof area and panel count.
How does it stop an install going ahead before the scaffold is checked?+
On the Pro plan, solar jobs get a checklist item for the scaffold to be erected and inspected within the last seven days, with evidence, before the install can be marked done. It applies when the survey says scaffold is needed. A second item asks for the structural and roof survey to be signed off before the install is booked.
Which MCS documents does installHUB produce for solar PV?+
The MCS survey form, the solar PV installation checklist, the solar PV commissioning checklist and the PV array test report, filled in from the job, plus the solar PV system handover document and an electrical installation and testing certificate. Above 50 kWp the MCS forms are left out, because MCS doesn't apply, and the array test report is still produced. The MCS certificate itself comes from MCS.
Does it tell me whether a solar job needs G98 or G99?+
Yes, for UK jobs. installHUB works it out from the system size, the supply phases and any export limit, prints it on the survey documents, and lets you submit through ENA Connect Direct or generate the G98 and G99 forms. If a submission is already on record, that takes priority.
We design and sell in OpenSolar. Do we have to retype the job?+
No. On the Pro plan, a project reaching your sold stage in OpenSolar arrives as an installHUB job with the customer, the system, a priced quote marked accepted, the deposit and the proposal and contract PDFs. Install dates and workflow stages write back to OpenSolar.
Can a roofer, a PV fitter and an electrician work the same job?+
Yes, on the Pro plan. Book them onto one visit as a crew, each with their trade and hours, plan an install over several days, and each person ticks off their own part in the app.
Does it work for solar installers outside the UK?+
Yes. The installation forms work in any country, there are international versions of the commercial solar forms, and currency and dates follow your company settings. MCS, G98, G99 and ENA Connect Direct are UK-only, so they don't apply to jobs elsewhere.
