MCS compliance software for renewable installers

MCS compliance software should hold the evidence an MCS installation needs in one place and build a digital audit trail as the job is done: certified operatives, site photos captured on the job, checklists that gate each stage, and signed completion documents against the job. For UK solar PV and heat pump installers, MCS-compliant work is what lets a job qualify for grants and export payments, so the paperwork has to be airtight and easy to find. This guide covers the features that matter and how installHUB handles them.

A note on scope. The official MCS certificate itself is issued by MCS (UK) through its MCS Installation Database when the installer registers the installation. The job of your installation software is everything around that: generating the compliance paperwork, proving the right person did the work, capturing the evidence as it happens, and keeping it so you can produce it on demand rather than reconstructing it later.

What MCS compliance software should do

  • Hold certification against the operative. MCS, NICEIC and other competencies with certificate numbers, issuing body and expiry dates, so you can prove who was qualified to do the work, and the scheduler does not send someone who is not.
  • Capture evidence on site. Photos taken on the job and attached to it, not emailed around and lost.
  • Gate the job through its stages. Checklists that make sure survey, install and commissioning steps are done before the job moves on, so gaps are caught at the time.
  • Generate the documents. Completion documents and job paperwork produced from the job record with the operative's signature embedded.
  • Keep one record per job. Survey, design, DNO application, install, documents and sign-off on a single job, so an audit is a search, not an archaeology dig.
  • Capture the equipment and asset details. Record the make, model and serial numbers of the installed equipment on the job, so the information is on the record when you need it.

MCS in context (UK)

MCS applies to UK renewable installs. It is the standard that lets a solar PV or heat pump installation feed government-backed grants and the export payments a customer expects. Certification sits against the business and its operatives, and each job needs its evidence. If you install outside the UK, equivalent schemes and documents differ, so your software should let you vary forms and documents by country rather than assuming MCS everywhere.

MCS is also one piece of a wider compliance picture. Grid-connected solar and battery work needs a DNO notification, a G98 or G99 application, and electrical work carries its own Part P and certification trail.

How installHUB does it

installHUB is installation job management software, so the compliance evidence is built up as the job runs rather than chased at the end.

  • Certification and competency tracking. Each operative has a certifications tab holding MCS, NICEIC and OZEV certificates with number, issuing body and expiry. Badges flag valid, expiring or expired, a daily alert warns on certificates expiring soon, and the scheduler stops proposing people who are not certified for the work. The same records feed a pre-qualification questionnaire instead of being re-entered. Available on all plans.
  • Evidence capture. Field operatives capture site photos on the mobile app, attached to the job and held offline-safe until they upload.
  • Checklists and gates. Job checklists and gates make sure each stage is complete before the job progresses (Pro plan and later).
  • Documents generated per technology. installHUB fills the compliance paperwork as PDFs from the job and form answers, so it is ready on completion rather than typed up afterwards. Heat pump jobs get an ASHP Heat Pump Compliance Certificate, a Heat Pump Commissioning Checklist and an ASHP Handover Checklist. Solar PV and battery jobs get a Solar PV System Handover Document, a Battery Storage Handover Document, an EESS commissioning report and the MCS forms (Survey Form, Solar PV installation and commissioning checklists, PV array test report, and the battery storage inspection and commissioning checklists). EV, solar and battery electrical work gets an Electrical Installation Certificate (UK, to BS 7671). The official MCS certificate is issued by MCS when the installer registers the installation in the MCS Installation Database; installHUB prepares the documents and evidence that go with it. See documents.
  • One record per job. Survey, quote, schedule, install and documents stay on one job, so the audit trail is in one place.
  • DNO steps. Submit G98 and G99 applications through the ENA gateway on every plan, and keep the equipment and asset details on the job. See DNO and regulatory.

For background on the certification scheme itself and what it means for your business, see MCS certification. For the wider platform, see job management software and pricing, or book a demo.

installHUB also supports installers operating outside the UK, with forms and documents set per country.

Frequently asked questions

What is MCS compliance software?

Software that helps a renewable installer run and evidence MCS-compliant work: holding operative certifications, capturing site photos, gating the job through its stages, and generating the completion documents and audit trail an MCS job needs.

Does installHUB generate MCS certificates?

Not the official MCS certificate itself. That is issued by MCS through its MCS Installation Database when the installer registers the installation. installHUB generates the documents and evidence that go with it, filled from the job as PDFs: for heat pumps an ASHP compliance certificate, a commissioning checklist and a handover checklist; for solar PV and battery the handover documents, an EESS commissioning report and the MCS forms (survey form, installation and commissioning checklists, PV array test report, and battery inspection and commissioning checklists); and for EV, solar and battery electrical work an Electrical Installation Certificate. Alongside these it holds the certified operatives, site photos and checklist sign-offs, so you can produce the proof MCS and your customers ask for.

How do I keep a digital audit trail for solar and heat pump installs?

Keep everything on one job record as it happens: who was certified, the site photos, the checklist sign-offs and the completion documents. installHUB captures these during the job rather than after it.

Can the software stop uncertified operatives being scheduled?

Yes. installHUB holds each operative's certifications with expiry dates, and the scheduler stops proposing people who are not certified for the work.

Does it handle heat pump grant work?

installHUB does not handle Boiler Upgrade Scheme voucher paperwork. It runs the heat pump job itself: the survey, the schedule, the certified operative, the photos and the completion documents, and keeps the equipment details on the job. See the [Boiler Upgrade Scheme checker](https://installhub.com/tools/boiler-upgrade-scheme-checker/) for scheme eligibility.

How does MCS relate to DNO applications?

They are separate steps on the same job. MCS covers the quality and certification of the install; a DNO G98 or G99 notification covers the grid connection. installHUB handles both on one record.

Company

©2026 installHUB™ | A product of Khan Soft Ltd, registered in England no. 15956975, Unit C Piccadilly Business Centre, Aldow Enterprise Park, Blackett Street, Manchester, M12 6AE